 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
| |
 |
CME LLC offers products for repairing leaking cracks in concrete bridge walls,
decks, tanks, and foundations. Using epoxy and urethane methods are offered
using high pressure injection pumps or dual manual injection guns. State of the art
urethane grouts and epoxies are available. We specialize in the manufacturing of
materials and equipment for all kinds of basement water issues including basement
leaks, concrete crack injection, draintile replacement and many other foundation
repairs.
decks, tanks, and foundations. Using epoxy and urethane methods are offered
using high pressure injection pumps or dual manual injection guns. State of the art
urethane grouts and epoxies are available. We specialize in the manufacturing of
materials and equipment for all kinds of basement water issues including basement
leaks, concrete crack injection, draintile replacement and many other foundation
repairs.
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
Customer Service: (630) 771-0380
Data Sheet:
Foundation Crack Repair Materials & Methods
 |  |  |  |
High Pressure Concrete Crack Injection
The method starts by drilling into the wall every 8 to 10 inches at a 45 degree angle
with the goal of intersecting the crack somewhere in the middle of the wall.
Alternate sides to insure intersection. A mechanical packer is then placed in the
drill whole and wrenched snug. Finally, the drill pump is attached to each packer,
starting at the bottom and working up the wall.
High Pressure Products
Aluminum Packers
Sizes:
3/8"x2.75"
1/2"x4.00"
5/8"x4.00"
Coupler
4-Jaw Heavy Duty
Everseal 6000
Includes:
Drill
Pump
Hose Assembly
Flex Foam Injection Grout
Sizes:
3/8"x2.75"
1/2"x4.00"
5/8"x4.00"
Coupler
4-Jaw Heavy Duty
Everseal 6000
Includes:
Drill
Pump
Hose Assembly
Flex Foam Injection Grout
Low Pressure Concrete Crack Injection
One, low pressure injection costs very little to get started in. Secondly, low
pressure injection is very fast and easy to use.
The method starts by drilling into the wall every 8 to 10 inches at a 45 degree angle
with the goal of intersecting the crack somewhere in the middle of the wall.
Alternate sides to insure intersection. A mechanical packer is then placed in the
drill whole and wrenched snug. Finally, the drill pump is attached to each packer,
starting at the bottom and working up the wall.
pressure injection is very fast and easy to use.
The method starts by drilling into the wall every 8 to 10 inches at a 45 degree angle
with the goal of intersecting the crack somewhere in the middle of the wall.
Alternate sides to insure intersection. A mechanical packer is then placed in the
drill whole and wrenched snug. Finally, the drill pump is attached to each packer,
starting at the bottom and working up the wall.
Low Pressure Products
Surface Seal
Everseal Surface Seal and Port
Adhesive
Features Include:
Fast Set Time
Virtually No Odor
Removable
Available in 300/300 Dual Tubesets,
Gallons, and Drums
Everseal Flex Foam
Features Include:
Flexible...excellant free thaw resistant
Dense...exceptional reliability and
waterproofing
Will not shrink
Available in 300/300 Dual Tubesets,
Gallons, and Drums
Everseal Epoxy LV
Features Include:
Strong...great for repairing cracks
Thin...works on small cracks
Available in 300/300 Dual Tubesets
and Gallons
Everseal Surface Seal and Port
Adhesive
Features Include:
Fast Set Time
Virtually No Odor
Removable
Available in 300/300 Dual Tubesets,
Gallons, and Drums
Everseal Flex Foam
Features Include:
Flexible...excellant free thaw resistant
Dense...exceptional reliability and
waterproofing
Will not shrink
Available in 300/300 Dual Tubesets,
Gallons, and Drums
Everseal Epoxy LV
Features Include:
Strong...great for repairing cracks
Thin...works on small cracks
Available in 300/300 Dual Tubesets
and Gallons
Low Pressure Dual Gun
Plastic Low Pressure
Injection Port
Injection Port
Starter Kit for Low
Pressure Injection
Pressure Injection
Surface Paste
Urethane Grout
Main Menu
Concrete Solutions For Concrete Repair